Displaying items by tag: rigs

CARP FISHING WITH MARC - By Marc

Seasonal Changes 2006 - Part 1

With runs drying up, Mr Carp getting harder to find & the winter weather becoming even less inviting, it was time to start thinking, debating, putting a few changes into my coming seasons quest.

I decided upon three areas of my fishing that needed a bit more concentration, modification etc. Terminal Tackle, Location and Bait. I chose these three points as like many other anglers we become lazy, “It worked last time, why change it”, “Everyone else is using this”. It’s so easy to fall into complacency but a few little changes can pay off big time!

I hope from reading this article you can pick up some ideas which may help you put a few extra carp on the bank.

Part One: The End Bits !

Terminal Tackle? Where do I start? We are bombarded by magazines, videos & crammed shelves full of all the latest gadgets & gizmos at the local tackle shop.

Don’t get me wrong I have tried, tied some of these space age rigs & had some great results, but I prefer to keep it simply with a few modifications.

Lets start with hooks, this past year I have switched to using Korda hooks, the wide gape & the long shank X. These hooks are incredibly strong & stay sharp even fishing over gravel, stone etc. The wide gape I have found to be perfect for fishing against weed & snags. They seem to be like a magnet in the carp’s mouth, absolutely brilliant. I have used other brands of hooks with a few problems, opening out on the bend, snapping at the bend etc.

Hook links have become a bit of a fashion accessory to me, manufacturers bring a new one out, I gotta have it !!

I prefer soft hook links, in various lengths, but I’m decreasing them in length.

During a visit to one of my local lakes, I had a quick walk round, visited the four other anglers in situ & got the same response from all of them “Its hard going Marc” not exactly what I wanted to hear!

This got me thinking & after a few searching questions a pattern emerged - they were all using hook links from 6”-9” in length with loads of freebies scattered around.

Rather than just getting my rods & casting to the hot spots I sat there for while, smoked a cigarette, deep in thought. I proceeded to take my rods out of the quiver & cut the long hook links off. I tied one rod with a link around 3” long & mounted a single 14mm boilie. The next rod I tied a link around 2” & mounted one piece of glugged maize & a small piece of yellow foam above it. The third rod I kept to the normal pattern I had been using in the past. All three rods had a small pva bag of chopped offerings attached & cast out to the likely spots.

I was hardly settled into my chair when the maize rod was off, not a monster fish but a carp all the same. I made another pva bag up & cast back out to the same spot (I all ways mark my line whether day or night). I had literally resat back down & poured a coffee out when the maize was off again, two runs in less than thirty minutes of fishing - this time an upper double graced my mat & the attention from the other anglers was growing. The nearest angler kindly did the photographs for me & as I slipped the fish back into the water the single 14mm boilie rod leapt into action, I was in again, another small double laid on the mat.

On returning the fish, the owner of the fishery popped over with two other anglers, all with the same question “What bait you on then mate”? I replied “Two fish on maize, one on boilie” there was a bit of head shaking going on in disbelief from the other anglers as they departed to their swims.

I went on to catch another four carp that day all from the short hook links, not one of the other anglers asked me about my presentation, just about the bait?

As I mentioned earlier I try to keep my hook links simple, eighty percent of the time I use the knotless knot with a small piece of tubing near the bend of the hook & a piece of heat shrink of about ¾”. The heat shrink I like placed opposite the point down the hooks shank & about ½” above the eye with a slight bend towards the point.

I have also been using a micro ring on the hook replacing the tubing - this does increase the weight of the hook towards the point & aids in hooking/turning of the hook when entering the carp’s mouth.

I do use combi-link materials too; however I do prefer to use them when fishing pop-ups.

If I want a stiff rig presentation I use amnesia (fluoro) rather than combi material.

I have had some blinding results from single bait popped up 2” from the lead.

This season all of my rigs incorporate the kwik change links that are available from most fishing tackle suppliers; they simply speed up all the process of swapping rigs & getting fishing again.

Another change I made this season was my lead arrangement, rather than follow all the other anglers with the semi fixed lead I started using running leads, leads with a stop bead 3” up the rig tube & the helicopter rig, all with different sized leads. Yes some rigs do rely on a heavy lead to function properly, but this season saw me use leads only heavy enough to reach the baited area.

My rig tube choice has to be Korda, the sinking version; they make various colours, its always super smooth & supple. Tungsten putty seems to grip to it beautifully too. Above the tubing I will normally place a flying back lead with a stop of about 3ft-4ft on the main line. I find these little weights great for pinning the last few feet of rig down to lake bed.

For the last two seasons I have been loading my reels with the unrivalled X-Line - it sinks like a brick, its fluorocarbon based, casts well & has yet to let me down.

I hope upon reading this you may get some useful tips, ideas to try out yourselves & please remember to keep your rigs safe!!!

By the way I’m not a Korda consultant; I just love & have 100% faith in their tackle.

Next time I’m going to have a natter about the bait changes I made during the season 2006.

Tight lines Marc

Pre-tied fishing rigs from Sticky Sharp Rigs - By Marc

Firstly I would like to thank Paul at UK Fisherman & the guys from 'Sticky Sharp' for giving me the opportunity to try out these rigs, I have been carp fishing for many years now & have always tied my own rigs so when the sample rigs arrived I was semi cautious/excited about using them.

Rigs Tested

The Basic Rig, The Blow Back, The Line Aligner, The Withypool & The Combi-Rig

First Impressions

Dont expect any fancy packaging with these rigs. Each rig arrived in a clear logo-less plastic sleeve with just a brief description hand written on the sleeve.** I must say how nice it was to actually see the whole contents of the sleeve laying perfectly within & not a tangled mess you receive from other rig companies. All five rigs looked as if they had been hand-tied using top quality components & they even had the highly fashionable quick release hoops attached to the main line end.

** Please note that the rigs supplied for review were samples and not the finished article. All sticky Sharp Rigs are supplied with full graphic inserts with text on the reverse. (Paul, UK Fisherman)

The Tests

Would these rigs withstand the abuse of everyday carp fishing on the end of my Ballista's? fishing against snags & lily pads? fished with pva bags attached? More importantly would they pass the on the bank knot test?

At this point I must emphasis just how important it is to check all your terminal gear before casting out, knot checks, hook sharpness check etc

The Basic Rig
As many of you will know this is a no frills rig, simple construction, simple mechanics, a rig found in many carp anglers rig wallets all over the UK/Europe including my own.

The hook was perfectly tied to the soft braided material, the braided material was smooth, kinkless & unfraid. As with any rig tied to my mainline a thorough test is undertaken on all knots. The rig passed all bankside abuse I could throw at it. Laying the rig in the shallow margins of the lake things looked good, hook link camoflage looked good & with the use of a pva nugget on the hook the whole rig came to rest nicely on the bottom.

With bait & pva bag attached the rig was chucked to around 70yds, things seemed to land in a nice straight line & the pva nugget floated up to the surface from the hook below ... I was happy. Thirty or so minutes later I was more than happy when a carp of around 15lb was lying on my mat, the hook had caught hold just off the middle of the bottom lip ... good enough for me. As I do with all my rigs after a capture, I recheck the setup. Bearing in mind the carp did take me through two lily beds all looked very good. I did however slip my sharpen stone lightly over the hook a few times. The rig was rebaited & recast to the same spot. I did get another run on this rig but lost the fish in the lily pads, the rig came back with a slightly fraid hook link, the hook looked good for another carp but was replaced.

The Blow Back Rig
This rig is one of my all time favourite rigs. For many years I have used this type of rig. This is my favoured rig when used in conjunction with pop-ups or snowman baits. The rig was perfectly constructed, the only modification I made to this rig was the length of the hook link. I do prefer my hook links quite short & after some minor adjustments the rig looked good. Once baited & attached to the mainline I again dropped the rig into the margin to check the presentation. Again I was more than happy. It looked very good & blended in very well with the lake bed. A small counter balance was added under the hook just to sink the hook bait down & it was ready for the lake.

Cast out to the already baited area once again the pva nugget popped to the surface & I added a few freebies over the spot. It wasn't long before the delkim alerted me to some action, the bobbin rose then gently slid down indicating a drop back. I tightened to the lead & struck, the battle was short lived. On retreaving the rig Ii noticed the hair had become tangled around the bend of the hook. I'm not sure whether this was down to the length of the hair or rejection of the boilie from the carps mouth?

I shortened the hair & with the use of some pva string I tied the hair tightly down the shank of the hook to the bend, this should keep any tangles down to the minimum while casting out. Just to make sure & give me peace of mind I inserted the hook link into a pva stocking & recast. After three hours I had landed two carp on this rig & after the minor modifications I was 100% confident in the rig. If the hook hadn't felt & looked so dull Ii would of probably left it on!

The Line Aligner Rig
This is another very popular rig, not too much different from the Basic Rig apart from the use of the shrink tube at the hooks eye. Great looking rig, nicely constructed ... so I thought?

As with all the rigs, I put them under a knot test using the Korda Knot Puller. This is where the hook link parted about half way along its length. I couldn't see any visible fault/damage in the link it just snapped. Sadly this hooklink was taken apart, hook/QR link were saved for later use on my own hook link material.

The Withypool Rig
Personally im not a great fan of this rig but I gave it go on my third rod, the rig passed all the knot tests & looked good in the margin with a single 18mm pop-up attached. I was very impressed with the silicon/shrink tube used on this rig. After several pulls & tugs on it, it went back to its original pre-steamed shape ... well impressed. As I said earlier, a single pop-up was attached & cast just off the baited area. The reason for this being I was receiving several liners on the other two rods.

I sat there wondering about the rig, thinking how crude it looked, trying to understand why & how it works so well for so many anglers around the country when to my amazement I was in! Amazed & shocked when laying on my mat was my first twenty of the season & it fell to a rig I had little confidence in. After checking the hook & its components it was re-baited & cast to the same spot with greater confidence & high expectations. Within the hour I hand landed another carp just short of 18lb on this rig & quickly tied up my version of this rig & cast out just before night fall.

Excellant rig, thumbs held up high on this one guys!!!!!!!!

The Combi Rig
This rig & variations of this rig have been knocking around for years and it has accounted for loads of carp up & down the country. Like all the rigs, it looked the business, nicely tied, hook sharpness 100% and the knot test passed with no problems. Not even any knot slip, which is quite common when using these coated hook links.

One useful tip when using these styles of rigs is to slightly heat the coated area of the link before casting out, just to make the link nice & straight & to stop any coils from occuring during use.

This was a very friendly rig to use, sadly no fish were caught upon it but it didn't tangle, the outer coating didn't start to peel off like some other brands do and it laid nicely on the lake bed. I did add a few drops of Tungsten Putty up the link just for peace of mind. I apply this tactic to most of my hooklinks nowadays.

Conclusion

When asked to test these rigs I was a little reserved as for many years I have tied all my rigs myself.

• As I said before I liked the way the rigs were packaged, you could see what you were buying, no tangled messes at the bottom of a fancy looking display bag.
• All the hooks were beautiful & sharp.
• The addition of the QR hoop at the end of the link was a nice touch as well as the knots that were all shrink tubed.
• Apart from one of the hooklinks snapping when testing i was pleased with all the materials used.
• Some of the hook links were a little long for my preference, but easily adjusted.
• To my surprize the Withypool Rig out fished the other rigs accounting for five carp including a twenty. Two carp fell to the Blow Back Rig & two to the Basic Rig.

So overall i was very impressed with the rigs & would have confidence in attaching them to my mainline.

I highly recommend these rigs. Thanks to the guys at Sticky Sharp for a great product.

Score:

Where to buy the The Sticky Sharp Rigs

Check out their website at www.stickysharprigs.co.uk where you can buy these excellent rigs online.